Powerware 9315-80 UPS Model 80 80kVA/64kW

Specifications:
Frequency range: (60 Hz) 57-63 Hz;
(50 Hz) 47-53 Hz
Power factor: 0.95 typical at full load with input filter.
Input current distortionless than 7% with input filter
Voltage THD: Less than 5% (100% non-linear
load with 3:1 crest factor); less
than 3% (100% linear load)
Voltage regulation: Better than ±1%
Transient response: Less than 5% for 100% load step;
full recovery within 1 cycle
Frequency: (free run) ±0.005 Hz

Powerware 5119 UPS PW5119 2400i
Technical Specifications:ELECTRICAL INPUTVoltage 120 and 230 VAC nominal;Online Voltage -30%, +20% for nominal voltages; user-selectableRange extended range of -35%, +20% (-30%, +15% for 127and 240 VAC)Nominal Input 50/60 Hz; auto-selection (60 Hz only for 120 and 127 Vac)FrequencyFrequency Toleranc

Powerware BPIV Industrial UPS 15 kVA/13.5 kw
Descriptions:The BPIV delivers enhanced backup power, power quality, and system reliability with the highest efficiency ratings of any online UPS in the 10-30 kVA range for industrial equipment. Powerware Industrial UPS systems offer cost savings with the best power protection.

Powerware BPIII HE UPS 62.5 kVA/50 kw
Specifications:Configuration: 3-Phase, 3 wire plus groundRange Nominal +10%, –15%Frequency range Nominal ±3 Hz (60 Hz)Power factor Minimum 0.9 with filterPower walk-in 3-60 seconds to full loadInput current 10% THD under nominal conditions distortion with filterTransient protection 6kV OC, 3 kV S

Powerware 9120 UPS PW9120 2000i
Descriptions:The Powerware 9120 UPS is designed for those applicationsthat need maximum protection in the 700 VA – 3 kVA range.With its high-frequency, doubleconversion online topology, providingnonstop clean sine wave power, advanced communicationsand space-saving tower design, the Powerware 9120

Eaton Powerware 5110 UPS 51100500A
Specifications:Capacity 500VA/300WDimensions (mm) HxWxD 270x87x260Unit Weight (kg) 5 6 8 12 12.5Input Connection 1.8 metre line cord IEC to Australian 10Amp PlugOutput Connection 6 Australian 10Amp Outlets (3 Battery Backup & Surge Protection,3 Surge Protection only)OperationInput Voltage Range (on-

Powerware 9104 UPS RSR31
Descriptions: The Powerware 9104 uninterruptible power system (UPS) provides quality power protection ranging from 3.1 to 6 kVA. Using dual-conversion online technology, this UPS delivers excellent voltage regulation, bi-directional filtering to eliminate power line noise, and low input curren

Powerware 9315-50 UPS Model 50 50kVA/40kw
Specifications:Input SpecificationsFrequency range (60 Hz) 57-63 Hz (50 Hz) 47-53 HzPower factor 0.95 typical at full load with input filterInput current Less than 7% with input filter distortionOutput SpecificationsVoltage THD Less than 3% for 100% linear load.Less than 5% for 100% non-linearload w

Eaton Powerware 3105 UPS 103004251-5592
Specifications:Rating (VA/Watts) 700/420Dimensions (H x W x D, inches) 4.6 x 7 x 11Weight (lbs) 15.4lectrical InputConnection (1) IEC-320-C14Input Cord 1.8 meter line patch cord IEC to IECInput Voltage Range 0-300 VacNominal Voltage 230 VACElectrical OutputOutput Receptacles (4) IEC-320-C13(4) IEC-3

Powerware 9320-C02 UPS
Descriptions:the Powerware 9320 offersall three in a modular, scalableUPS. The Powerware 9320 isdesigned to provide redundancyas well as the ability to increasesystem capacity as your needschange by using 10 or 20 kVAmodules in a single cabinet

Powerware 9170 Online UPS PW12S12K
Specifications:Topology Online Double ConversionPower Rating (VA) 12000Rated Load Capacity (Watts) 10000Electrical InputInput Voltage 208-240 neutral required Electrical OutputOutput Voltage 208-240/120Battery BackupBattery Runtime Minutes (Full Load) 6.5Battery Runtime Minutes (Half Load) 16Optiona