Powerware BPIV Industrial UPS 20 kVA/18 kw

Descriptions:The BPIV delivers enhanced backup power,
power quality, and system reliability with the highest
efficiency ratings of any online UPS in the 10-30 kVA
range for industrial equipment. Powerware Industrial
UPS systems offer cost savings with the best power
protection.

Powerware BPII HE UPS 20 kVA/16 kw
Descriptions:Balanced Power II HE and Balanced Power II-S HE (BPII HE and BPII-S HE) offer the reliability of true online technology utilizing digital signal processing (DSP) control and monitoring. In addition, the BPII HE and BPII-S HE use the patented technology of an inverter software harmonic c

Powerware BPIII HE UPS 62.5 kVA/50 kw
Specifications:Configuration: 3-Phase, 3 wire plus groundRange Nominal +10%, –15%Frequency range Nominal ±3 Hz (60 Hz)Power factor Minimum 0.9 with filterPower walk-in 3-60 seconds to full loadInput current 10% THD under nominal conditions distortion with filterTransient protection 6kV OC, 3 kV S

Powerware 9315-80 UPS Model 80 80kVA/64kW
Specifications:Frequency range: (60 Hz) 57-63 Hz; (50 Hz) 47-53 HzPower factor: 0.95 typical at full load with input filter.Input current distortionless than 7% with input filterVoltage THD: Less than 5% (100% non-linearload with 3:1 crest factor); lessthan 3% (100% linear load)Volta

Powerware 9104 UPS RST32
Descriptions:The Powerware 9104 uninterruptible powersystem (UPS) provides quality power protectionranging from 3.1 to 6 kVA. Using dual-conversiononline technology, this UPS delivers excellentvoltage regulation, bi-directional filtering toeliminate power line noise, and low input currentdistortion.

Powerware 9305 UPS PW9305-50I-N
Specifications:Rating 50 kVA Capacity (VA/Watts) 50 kVA/35 kWDimensions WxDxH (mm) 520x788x1530Weight (kg) 260Input connection Hardwired Output connection HardwiredTypical runtime (Full load) 7 min (Half load) 20 min

Eaton Powerware 5110 UPS 51101500A
Specifications:Capacity 1500VA/900WDimensions (mm) HxWxD 270x87x384Unit Weight (kg) 5 6 8 12 12.5Input Connection 1.8 metre line cord IEC to Australian 10Amp PlugOutput Connection 6 Australian 10Amp Outlets (3 Battery Backup & Surge Protection,3 Surge Protection only)OperationInput Voltage Range (on

Powerware 9125 Rackmount UPS 91251500iRM
Specifications:Rating 1500VA Capacity (VA/Watts) 1500/1050Dimensions WxDxH (mm) 432x490x89 Weight (kg) 23 Input Connection IEC320/10AOutput Connection 6xIEC320 10A OperationalNominal input voltage (Vac) 220/230/240 VacInput voltage range 160-288 VAC

Powerware 9120 UPS PW9120 3000h
Descriptions:The Powerware 9120 UPS is designed for those applicationsthat need maximum protection in the 700 VA – 3 kVA range.With its high-frequency, doubleconversion online topology, providingnonstop clean sine wave power, advanced communicationsand space-saving tower design, the Powerware 9120

Powerware Plus18 UPS Model 18
Specifications: Input Frequency Range 45-65 Hz Power Factor 0.95 Typical at full load Output Voltage Regulation Better than +/- 3% Voltage THD Less than 5% (100% nonlinear load); Less than 3% (100% linear load)Transient Response Less than 5% for 100% load, step full recovery within 1/4 cycl