Powerware BPII HE UPS 30 kVA/24 kw

Descriptions:Balanced Power II HE and Balanced Power II-S HE
(BPII HE and BPII-S HE) offer the reliability of
true online technology utilizing digital signal
processing (DSP) control and monitoring.
In addition, the BPII HE and BPII-S HE use
the patented technology of an inverter software
harmonic conditioner for less than 4% THD output
while driving 100%non-linear loads. In addition,
the BPII HE and BPII-S HE offers enhanced UPS/generator
interface as well as rectifier-intelligent battery charging.

Powerware 9170 Online UPS PW6S3K-PD
Specifications:Topology Online Double ConversionPower Rating (VA) 3000Rated Load Capacity (Watts) 2500 Electrical InputInput Voltage 208-240 neutral required Electrical OutputOutput Voltage 208-240/120Output Connection (2) L14-30R L14-30R (2) L6-30R L6-30R(12) 5-20R 5-20R Battery BackupBattery Run

Powerware 9120 UPS PW9120 1500i
Descriptions:The Powerware 9120 UPS is designed for those applicationsthat need maximum protection in the 700 VA – 3 kVA range.With its high-frequency, doubleconversion online topology, providingnonstop clean sine wave power, advanced communicationsand space-saving tower design, the Powerware 9120

Powerware BPIII HE UPS 75 kVA/60 kw
Specifications:Configuration: 3-Phase, 3 wire plus groundRange Nominal +10%, –15%Frequency range Nominal ±3 Hz (60 Hz)Power factor Minimum 0.9 with filterPower walk-in 3-60 seconds to full loadInput current 10% THD under nominal conditions distortion with filterTransient protection 6kV OC, 3 kV S

Powerware 5140 Rack-mount UPS PW5140 6000
Specifications:Power Rating: 6000VA/6000WattsVoltage:200-240 VFrequency:50 and 60HzConfiguration:6U rackmount for standard 19-inch racksTopology: Line-interactive (with pure sine wave output)

Eaton Powerware 5110 UPS 51100350A
Specifications:Capacity 350VA/210W Dimensions (mm) HxWxD 270x87x260Unit Weight (kg) 5 6 8 12 12.5Input Connection 1.8 metre line cord IEC to Australian 10Amp PlugOutput Connection 6 Australian 10Amp Outlets (3 Battery Backup & Surge Protection,3 Surge Protection only)OperationInput Voltage Range (on

POWERWARE 9150 UPS 8I-N-10
Specifications:Rating 8-15 kVA at computer loadEfficiency Up to 93% onlineAudible noise

Eaton Powerware 3105 UPS 103004251-5592
Specifications:Rating (VA/Watts) 700/420Dimensions (H x W x D, inches) 4.6 x 7 x 11Weight (lbs) 15.4lectrical InputConnection (1) IEC-320-C14Input Cord 1.8 meter line patch cord IEC to IECInput Voltage Range 0-300 VacNominal Voltage 230 VACElectrical OutputOutput Receptacles (4) IEC-320-C13(4) IEC-3

Powerware BPIII HE UPS 62.5 kVA/50 kw
Specifications:Configuration: 3-Phase, 3 wire plus groundRange Nominal +10%, –15%Frequency range Nominal ±3 Hz (60 Hz)Power factor Minimum 0.9 with filterPower walk-in 3-60 seconds to full loadInput current 10% THD under nominal conditions distortion with filterTransient protection 6kV OC, 3 kV S

Powerware 9170 Online UPS PW12S15K
Specifications:Technical InformationPlug/Connector Type HardwiredReceptacles HardwiredPower DescriptionLoad Capacity 15 kVA/10.50 kWInput Voltage 110 V AC/220 V ACInput Voltage Range 120 V AC/208 V AC/220 V ACOutput Voltage 120 V AC/208 V AC/240 V ACFrequency 50 Hz/60 HzWaveform Type Sine WaveScalab

Powerware 9315-160 UPS Model 100 100kVA/80kW
Specifications:InputVoltage range: (See chart on other side)Frequency range: (60 Hz) 57-63 Hz; (50 Hz) 47-53HzPower factor: 0.95 typical at full load with inputfilter. Input current distortion lessthan 7% with input filtOutputVoltage regulation: Better than ±1%Transient response: Less than 5% for 1