Powerware 9315-160 UPS Model 160 160kVA/128kW

Specifications:
Input
Voltage range: (See chart on other side)
Frequency range: (60 Hz) 57-63 Hz; (50 Hz) 47-53Hz
Power factor: 0.95 typical at full load with input
filter. Input current distortion less
than 7% with input filt
Output
Voltage regulation: Better than ±1%
Transient response: Less than 5% for 100%
load step; full recovery within 1 cycle
Frequency: (free run) ±0.005 Hz
Frequency sync range: ±0.5 Hz
Voltage adjustment range (operator): ±5%

Powerware Plus18 UPS Model 15
Specifications: Input Frequency Range 45-65 Hz Power Factor 0.95 Typical at full load Output Voltage Regulation Better than +/- 3% Voltage THD Less than 5% (100% nonlinear load); Less than 3% (100% linear load)Transient Response Less than 5% for 100% load, step full recovery within 1/4 cycl

Powerware 9170 Online UPS PW6S6K-LPD
Specifications:Power DescriptionLoad Capacity 6 kVA/4.20 kWInput Voltage 110 V AC220 V ACInput Voltage Range 120 V AC208 V AC240 V ACOutput Voltage 120 V AC208 V AC240 V ACFrequency 50 Hz Input60 Hz Input

Powerware 9315-65 UPS Model 65 65kVA/52kw
Specifications:Frequency range (60 Hz) 57-63 HzPower factor 0.95 typical at full load with input filterInput current Less than 7% with input filter distortionOutput SpecificationsVoltage THD Less than 3% for 100% linear load. Less than 5% for 100% non-linear load with 3:1 crest

Powerware BPIII HE UPS 50 kVA/40 kw
Specifications:Configuration: 3-Phase, 3 wire plus groundRange Nominal +10%, –15%Frequency range Nominal ±3 Hz (60 Hz)Power factor Minimum 0.9 with filterPower walk-in 3-60 seconds to full loadInput current 10% THD under nominal conditions distortion with filterTransient protection 6kV OC, 3 kV S

Powerware 9170 Online UPS PW6S6K-PD
Specifications:Technical InformationPlug/Connector Type HardwiredReceptacles 12 x NEMA 5-20R2 x NEMA L6-30R2 x NEMA L14-30RPower DescriptionLoad Capacity 9 kVAInput Voltage 220 V ACInput Voltage Range 200 V AC/176 V AC to 276 V AC/208 V AC to 240 V ACOutput Voltage 220 V AC/200 V AC/208 to 240 V ACF

Powerware 9120 UPS PW9120 700
Descriptions:The Powerware 9120 UPS is designed for those applicationsthat need maximum protection in the 700 VA – 3 kVA range.With its high-frequency, doubleconversion online topology, providingnonstop clean sine wave power, advanced communicationsand space-saving tower design, the Powerware 9120

Eaton Powerware 5110 UPS 51100350A
Specifications:Capacity 350VA/210W Dimensions (mm) HxWxD 270x87x260Unit Weight (kg) 5 6 8 12 12.5Input Connection 1.8 metre line cord IEC to Australian 10Amp PlugOutput Connection 6 Australian 10Amp Outlets (3 Battery Backup & Surge Protection,3 Surge Protection only)OperationInput Voltage Range (on

Powerware BPIV Industrial UPS 10 kVA/9 kw
Descriptions:The BPIV delivers enhanced backup power, power quality, and system reliability with the highest efficiency ratings of any online UPS in the 10-30 kVA range for industrial equipment. Powerware Industrial UPS systems offer cost savings with the best power protection.

Powerware BPII-S HE UPS 30 kVA/24 kw
Descriptions:Balanced Power II HE and Balanced Power II-S HE (BPII HE and BPII-S HE) offer the reliability of true online technology utilizing digital signal processing (DSP) control and monitoring. In addition, the BPII HE and BPII-S HE use the patented technology of an inverter software harmonic c

Powerware 9320-C03 UPS
Descriptions:the Powerware 9320 offersall three in a modular, scalableUPS. The Powerware 9320 isdesigned to provide redundancyas well as the ability to increasesystem capacity as your needschange by using 10 or 20 kVAmodules in a single cabinet