Powerware BPII-S HE UPS 15 kVA/12 kw

Descriptions:Balanced Power II HE and Balanced Power II-S HE
(BPII HE and BPII-S HE) offer the reliability of
true online technology utilizing digital signal
processing (DSP) control and monitoring.
In addition, the BPII HE and BPII-S HE use
the patented technology of an inverter software
harmonic conditioner for less than 4% THD output
while driving 100%non-linear loads. In addition,
the BPII HE and BPII-S HE offers enhanced UPS/generator
interface as well as rectifier-intelligent battery charging.

Powerware Plus18 UPS Model 12
Specifications: Input Frequency Range 45-65 Hz Power Factor 0.95 Typical at full load Output Voltage Regulation Better than +/- 3% Voltage THD Less than 5% (100% nonlinear load); Less than 3% (100% linear load)Transient Response Less than 5% for 100% load, step full recovery within 1/4 cycl

Powerware 5119 Rackmount UPS PW5119 1000RM
Specifications:Electrical InputVoltage 120 and 230 VAC NominalOn Line Voltage Range -30%, +20% for nominal voltages; user selectable extended range of -35%, +20% (-30%, +15% for 127 and 240 VAC)Nominal Input Frequency 50/60 Hz; auto-selection (60 Hz only for 120 and 127 VAC)Frequency Tolerance No

Eaton Powerware 3105 UPS 103004251-5592
Specifications:Rating (VA/Watts) 700/420Dimensions (H x W x D, inches) 4.6 x 7 x 11Weight (lbs) 15.4lectrical InputConnection (1) IEC-320-C14Input Cord 1.8 meter line patch cord IEC to IECInput Voltage Range 0-300 VacNominal Voltage 230 VACElectrical OutputOutput Receptacles (4) IEC-320-C13(4) IEC-3

Powerware 9125 UPS PW9125 2500
Descriptions:the Powerware 9125 UPS delivers the ultimate in protection,truly isolating your equipment from all nine of the commonpower anomalies lurking in public utility power. Availableas either a rackmount or stand-alone unit, the compactand elegant 9125 supplies continuous, conditioned powerto

Powerware BPIV Industrial UPS 15 kVA/13.5 kw
Descriptions:The BPIV delivers enhanced backup power, power quality, and system reliability with the highest efficiency ratings of any online UPS in the 10-30 kVA range for industrial equipment. Powerware Industrial UPS systems offer cost savings with the best power protection.

Eaton-Powerware 3105 UPS 103004250-5592
Specifications:Rating (VA/Watts) 500/300Dimensions (H x W x D, inches) 4.4 x 7 x 11Weight (lbs) 11.2Electrical InputConnection (1) NEMA 5-15PInput Cord 6-foot line cord with 90° 5-15PInput Voltage Range 0-160 VacNominal Voltage 120 VACElectrical OutputOutput Receptacles (4) NEMA 5-15R(4) NEMA 5-15R

Powerware 5119 Rackmount UPS PW5119 3000iRM
Specifications:Electrical InputVoltage 120 and 230 VAC NominalOn Line Voltage Range -30%, +20% for nominal voltages; user selectable extended range of -35%, +20% (-30%, +15% for 127 and 240 VAC)Nominal Input Frequency 50/60 Hz; auto-selection (60 Hz only for 120 and 127 VAC)Frequency Tolerance No

Powerware BPIII HE UPS 75 kVA/60 kw
Specifications:Configuration: 3-Phase, 3 wire plus groundRange Nominal +10%, –15%Frequency range Nominal ±3 Hz (60 Hz)Power factor Minimum 0.9 with filterPower walk-in 3-60 seconds to full loadInput current 10% THD under nominal conditions distortion with filterTransient protection 6kV OC, 3 kV S

Eaton Powerware 5110 UPS 51101500A
Specifications:Capacity 1500VA/900WDimensions (mm) HxWxD 270x87x384Unit Weight (kg) 5 6 8 12 12.5Input Connection 1.8 metre line cord IEC to Australian 10Amp PlugOutput Connection 6 Australian 10Amp Outlets (3 Battery Backup & Surge Protection,3 Surge Protection only)OperationInput Voltage Range (on

Powerware 9305 UPS PW9305-60I-N
Specifications:Rating 60 kVA Capacity (VA/Watts) 60 kVA/42 kW Dimensions WxDxH (mm) 520x788x1530Weight (kg) 260Input connection Hardwired Output connection HardwiredTypical runtime (Full load) 10 min (Half load) 28 min