Eaton Powerware 5110 UPS 51100350A

Specifications:
Capacity 350VA/210W
Dimensions (mm) HxWxD 270x87x260
Unit Weight (kg) 5 6 8 12 12.5
Input Connection 1.8 metre line cord IEC to Australian 10Amp Plug
Output Connection 6 Australian 10Amp Outlets (3 Battery Backup & Surge Protection,
3 Surge Protection only)
Operation
Input Voltage Range (on-line operation) 186 to 280 VAC
Output Voltage Regulation on-line 216 to 260 VAC
On Battery Output Voltage Nominal -12% to +10%
Frequency 50 Hz

Powerware 9315-50 UPS Model 40 40kVA/32kW
Specifications:Input SpecificationsFrequency range (60 Hz) 57-63 Hz (50 Hz) 47-53 HzPower factor 0.95 typical at full load with input filterInput current Less than 7% with input filter distortionOutput SpecificationsVoltage THD Less than 3% for 100% linear load.Less than 5% for 100% non-linearload w

Powerware 9170 Online UPS PW6S3K-LPD
Specifications:Technical InformationPlug/Connector Type NEMA 14-50PReceptacles 12 x NEMA 5-20R2 x NEMA L6-30R2 x NEMA L14-30RPower DescriptionLoad Capacity 9 kVAInput Voltage 110 V AC/220 V ACInput Voltage Range 208 V AC to 240 V AC/176 V AC to 276 V AC/100 V AC to 127 V AC200 V ACOutput Voltage 200

Powerware 9315-160 UPS Model 100 100kVA/80kW
Specifications:InputVoltage range: (See chart on other side)Frequency range: (60 Hz) 57-63 Hz; (50 Hz) 47-53HzPower factor: 0.95 typical at full load with inputfilter. Input current distortion lessthan 7% with input filtOutputVoltage regulation: Better than ±1%Transient response: Less than 5% for 1

Powerware 5140 Rack-mount UPS PW5140 6000
Specifications:Power Rating: 6000VA/6000WattsVoltage:200-240 VFrequency:50 and 60HzConfiguration:6U rackmount for standard 19-inch racksTopology: Line-interactive (with pure sine wave output)

Powerware 9125 UPS PW9125 3000G
Descriptions:the Powerware 9125 UPS delivers the ultimate in protection,truly isolating your equipment from all nine of the commonpower anomalies lurking in public utility power. Availableas either a rackmount or stand-alone unit, the compactand elegant 9125 supplies continuous, conditioned powerto

Powerware 9125 UPS PW9125 700i
Descriptions:the Powerware 9125 UPS delivers the ultimate in protection,truly isolating your equipment from all nine of the commonpower anomalies lurking in public utility power. Availableas either a rackmount or stand-alone unit, the compactand elegant 9125 supplies continuous, conditioned powerto

Powerware 9170 Online UPS PW12S12K
Specifications:Topology Online Double ConversionPower Rating (VA) 12000Rated Load Capacity (Watts) 10000Electrical InputInput Voltage 208-240 neutral required Electrical OutputOutput Voltage 208-240/120Battery BackupBattery Runtime Minutes (Full Load) 6.5Battery Runtime Minutes (Half Load) 16Optiona

Powerware BPIII HE UPS 75 kVA/60 kw
Specifications:Configuration: 3-Phase, 3 wire plus groundRange Nominal +10%, –15%Frequency range Nominal ±3 Hz (60 Hz)Power factor Minimum 0.9 with filterPower walk-in 3-60 seconds to full loadInput current 10% THD under nominal conditions distortion with filterTransient protection 6kV OC, 3 kV S

Powerware Plus18 UPS Model 18
Specifications: Input Frequency Range 45-65 Hz Power Factor 0.95 Typical at full load Output Voltage Regulation Better than +/- 3% Voltage THD Less than 5% (100% nonlinear load); Less than 3% (100% linear load)Transient Response Less than 5% for 100% load, step full recovery within 1/4 cycl

Powerware 5140 Rack-mount UPS PW5140 6000 HW
Specifications:Power Rating: 6000VA/6000WattsVoltage:200-240 VFrequency:50 and 60HzConfiguration:6U rackmount for standard 19-inch racksTopology: Line-interactive (with pure sine wave output)