Powerware 9315-160 UPS Model 100 100kVA/80kW

Specifications:
Input
Voltage range: (See chart on other side)
Frequency range: (60 Hz) 57-63 Hz; (50 Hz) 47-53Hz
Power factor: 0.95 typical at full load with input
filter. Input current distortion less
than 7% with input filt
Output
Voltage regulation: Better than ±1%
Transient response: Less than 5% for 100%
load step; full recovery within 1 cycle
Frequency: (free run) ±0.005 Hz
Frequency sync range: ±0.5 Hz
Voltage adjustment range (operator): ±5%

Powerware 9120 UPS PW9120 1500i
Descriptions:The Powerware 9120 UPS is designed for those applicationsthat need maximum protection in the 700 VA – 3 kVA range.With its high-frequency, doubleconversion online topology, providingnonstop clean sine wave power, advanced communicationsand space-saving tower design, the Powerware 9120

Powerware BPIV Industrial UPS 20 kVA/18 kw
Descriptions:The BPIV delivers enhanced backup power, power quality, and system reliability with the highest efficiency ratings of any online UPS in the 10-30 kVA range for industrial equipment. Powerware Industrial UPS systems offer cost savings with the best power protection.

Eaton Powerware 5110 UPS 51100500A
Specifications:Capacity 500VA/300WDimensions (mm) HxWxD 270x87x260Unit Weight (kg) 5 6 8 12 12.5Input Connection 1.8 metre line cord IEC to Australian 10Amp PlugOutput Connection 6 Australian 10Amp Outlets (3 Battery Backup & Surge Protection,3 Surge Protection only)OperationInput Voltage Range (on-

Powerware Plus18 UPS Model 12
Specifications: Input Frequency Range 45-65 Hz Power Factor 0.95 Typical at full load Output Voltage Regulation Better than +/- 3% Voltage THD Less than 5% (100% nonlinear load); Less than 3% (100% linear load)Transient Response Less than 5% for 100% load, step full recovery within 1/4 cycl

Powerware 9104 UPS RST32
Descriptions:The Powerware 9104 uninterruptible powersystem (UPS) provides quality power protectionranging from 3.1 to 6 kVA. Using dual-conversiononline technology, this UPS delivers excellentvoltage regulation, bi-directional filtering toeliminate power line noise, and low input currentdistortion.

Powerware 5119 Rackmount UPS PW5119 2000iRM
Specifications:Electrical InputVoltage 120 and 230 VAC NominalOn Line Voltage Range -30%, +20% for nominal voltages; user selectable extended range of -35%, +20% (-30%, +15% for 127 and 240 VAC)Nominal Input Frequency 50/60 Hz; auto-selection (60 Hz only for 120 and 127 VAC)Frequency Tolerance No

Powerware 5140 Rack-mount UPS PW5140 6000 HW
Specifications:Power Rating: 6000VA/6000WattsVoltage:200-240 VFrequency:50 and 60HzConfiguration:6U rackmount for standard 19-inch racksTopology: Line-interactive (with pure sine wave output)

Powerware 9315-160 UPS Model 100 100kVA/80kW
Specifications:InputVoltage range: (See chart on other side)Frequency range: (60 Hz) 57-63 Hz; (50 Hz) 47-53HzPower factor: 0.95 typical at full load with inputfilter. Input current distortion lessthan 7% with input filtOutputVoltage regulation: Better than ±1%Transient response: Less than 5% for 1

Powerware 9320-C03 UPS
Descriptions:the Powerware 9320 offersall three in a modular, scalableUPS. The Powerware 9320 isdesigned to provide redundancyas well as the ability to increasesystem capacity as your needschange by using 10 or 20 kVAmodules in a single cabinet

Powerware Plus36 UPS Model 24
Specifications: Input Frequency Range 45-65 Hz Power Factor 0.95 Typical at full load Output Voltage Regulation Better than +/- 2% Voltage THD Less than 5% (100% nonlinear load); Less than 3% (100% linear load) Transient Response Less than 5% for 100% load, step full recovery within 1/4 cycl